In order to meet the needs of our customers, we have introduced an electrical kit that is cheap, easy to connect and simple to operate! The driver board and the control board can be directly connected with the signal cable provided by us. It is very convenient to use, and we provide very detailed English manuals and wiring diagrams. It is also easy for novices buyers to use!
1 x 24V/10A switching power supply
4 x single Axis TB6600 stepper motor driver
4 x 57HS56-3004 3A stepper motor
1 x 5 axis breakout board
1 x DB25 parallel cable
1 x USB cable
4 x signal cables
English user manual for 4 axis driver board will send by a CD or Email
5 Axis breakout board description:
1,fully support of MACH3 and other computer software support for parallel port control.
2,USB power supply and peripherals powered phase separation to protect computer security.
3,peripheral wide voltage input,12-24V, and anti-reverse function.
4,all of the input signal, all the light lotus isolated, which can be accessed emergency stop on the knife, the limit to protect computer security.
5,all the way to the relay output port, control spindle switch. Output port P17 mouth.
6,all the way through the optocoupler isolated 0-10V analog voltage output can be controlled with the corresponding analog interface converter to control the spindle speed. Output port P1 port.
7,open all 17 ports, which can be accessed with the optocoupler drive, 5-axis stepper motor can be controlled.
8,P1 as PWM outputs can be controlled with optocoupler input spindle governor.
9,can be accessed by a common cathode or common anode input level to 5V drive.
TB6600 Driver description:
1.DC power input type:12V~40V;
2.Output current:0~4.5A, stepless adjustable;
4.Automatic half current function: half or full current can be Selected through the switch;
5.Protect form : Overheated protection, over-current protection;
1.24V+:DC power positive pole
2.GND:DC power cathode
3.A+ A-:Stepping motor one winding
4.B+ B-:Stepping motor other winding
5.CLK-:Stepping pulse input+5V (Rising edge effective , rising edge duration >10μS)
6.CW-:Stepping motor direction input, voltage level touched off, high level foreward , low level reverse
7.ENA-: motor free
8.+5V: Signal common terminal
Stepper Motor Description:
Step Angle:1.8 deg
Single Shaft D type
Switching power supply
1. the range of AC input voltage is changed by the switch
2. high-efficiency, high reliability
3.100% full load burn-in test
4. Protections: Short circuit / overload / over voltage / over temperature
5. built-in cooling DC fan control
6. Working frequency is 25 kHz
7.Input Voltage: 110VAC/220VAC
8. Output Voltage:24V
9. Output Current:10A
11. 1 year warranty
12.Size:215 * 115 * 50mm(L*W*H)